Paint | ||
ALL | A-A-59166 | COATING COMPOUND, NONSLIP (FOR WALKWAYS) |
ALL | A-A-59745 | ZINC-RICH COATINGS |
ALL | MIL-C-22751 | COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT: PROCESS FOR APPLICATION OF |
ALL | MIL-C-81907 | COATING SYSTEM, POLYURETHANE, ALIPHATIC, WEATHER RESISTANT: PROCESS FOR APPLICATION OF |
ALL | MIL-DTL-5002 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
ALL | MIL-DTL-1195 | ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLIANT (FOR USE ON AMMUNITION AND OTHER METALS) |
ALL | MIL-DTL-14072 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
ALL | MIL-DTL-15090 | ENAMEL, EQUIPMENT, LIGHT GRAY (NAVY FORMULA NO. 111) |
ALL | MIL-DTL-18264 | FINISHES, ORGANIC, WEAPONS SYSTEMS, APPLICATION AND CONTROL OF |
ALL | MIL-DTL-53022 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
ALL | MIL-DTL-53030 | PRIMER COATING, EPOXY, WATER BASED, LEAD AND CHROMATE FREE |
ALL | MIL-DTL-53039 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
ALL | MIL-DTL-53072 | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
ALL | MIL-DTL-64159 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
ALL | MIL-DBK-808 | FINISH, PROTECTIVE AND CODES FOR SINISHING SCHEMES FOR GROUND AND GROUND SUPPORT AND EQUIPMENT |
ALL | MIL-PRF-22750 | COATING, EPOXY, HIGH-SOLIDS |
ALL | MIL-PRF-23236 | COATING SYSTEMS FOR SHIP STRUCTURES |
ALL | MIL-PRF-23377 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
ALL | MIL-PRF-24635 | COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
ALL | MIL-PRF-24647 | PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
ALL | MIL-PRF-24667 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
ALL | MIL-PRF-24712 | COATINGS, POWDER, THERMOSETTING |
ALL | MIL-PRF-32348 | POWDER COATING, CAMOUFLAGE CHEMICAL AGENT RESISTANT SYSTEMS |
ALL | MIL-PRF-32550 | METAL-RICH PRIMER |
ALL | MIL-PRF-46010 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE – S-1738 |
ALL | MIL-PRF-46147 | LUBRICANT, SOLID FILM, AIR CURED, CORROSION INHIBITING |
ALL | MIL-PRF-81329 | LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737 |
ALL | MIL-PRF-85285 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
ALL | MIL-PRF-85582 | PRIMER COATINGS: EPOXY, WATERBORNE |
ALL | MIL-STD-001303 | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
ALL | MIL-STD-171 | FINISHING OF METAL AND WOOD SURFACES |
ALL | MIL-STD-186 | MANUFACTURING PROCESS PROTECTIVE FINISHING FOR ARMY MISSILE WEAPON SYSTEMS |
ALL | MIL-STD-7179 | FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEMS AND SUPPORT EQUIPMENT |
ALL | MIL-T-704 | TREATMENT AND PAINTING OF MATERIEL |
ALL | TT-P-645 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
ALL | TT-P-2760 | PRIMER COATING: POLYURETHANE, ELASTOMETRIC, HIGH SOLIDS |
ALL | MIL-PRF-46010 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE – S-1738 |
Anodize | ||
ALL | MIL-PRF-8625 TYI CL1 | Chromic acid anodizing, conventional coatings produced from chromic acid bath Non-Dyed |
ALL | MIL-PRF-8625 TYI CL2 | Chromic acid anodizing, conventional coatings produced from chromic acid bath Dyed |
ALL | MIL-PRF-8625 TYIB CL1 | Chromic acid anodizing, low voltage process, 22 ± 2V Non-Dyed |
ALL | MIL-PRF-8625 TYIB CL2 | Chromic acid anodizing, low voltage process, 22 ± 2V Dyed |
ALL | MIL-PRF-8625 TY2 CL1 | Sulfuric acid anodizing conventional coatings produced from sulfuric acid bath Non-Dyed |
ALL | MIL-PRF-8625 TY2 CL2 | Sulfuric acid anodizing conventional coatings produced from sulfuric acid bath Dyed |
ALL | MIL-PRF-8625 IIB CL1 | Thin sulfuric acid anodizing, for use as a non chromate alternative for Type I and Type IB coatings Non-Dyed |
ALL | MIL-PRF-8625 TYIIB CL2 | Thin sulfuric acid anodizing, for use as a non chromate alternative for Type I and Type IB coatings Dyed |
ALL | MIL-PRF-8625 TYIII CL1 | Hard anodic coatings Non-Dyed |
ALL | MIL-PRF-8625 TYIII CL2 | Hard anodic coatings Dyed |
ALL | AMS 2469 | Hard Anodic Coating of Aluminum and Aluminum Alloys |
ALL | AMS2470 | Anodic Treatment of Aluminum Alloys Chromic Acid Process |
ALL | AMS 2471 | Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating |
ALL | AMS 2472 | Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coating |
Conversion Coating | ||
ALL | MIL-DTL-81706 | CHEMICAL CONVERSION MATERIALS FOR COATING ALUMINUM AND ALUMINUM ALLOYS |
ALL | MIL-C-5541 | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
ALL | MIL-DTL-5541 | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
ALL | AMS2473 | Chemical Film Treatment for Aluminum Alloys General Purpose Coating |
ALL | AMS2474 | Chemical Treatment for Aluminum Alloys Low Electrical Resistance Coating |
ALL | AMS2477 | Conversion Coating for Aluminum Alloys Low Electrical Resistance Coating |
Passivation | ||
ALL | AMS2700 | Passivation of Corrosion Resistant Steels |
ALL | ASTM A380/A380M | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
ALL | ASTM A967/A967M | Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts |
ALL | QQ-P-35 | Passivation Treatements for Corrosion Resistant Steel |
ALL | AMS-QQ-P-35 | Passivation Treatements for Corrosion Resistant Steel |
Paint | ||
AAR | AAR-ER-1387 | S-92A Paint Application |
AAR | AAR-PS-1116 | Finishing for OSA Offshore Interior Composite Parts |
Paint | ||
AIRBUS | A2PS 138-043 | APPLICATION OF FLUID RESISTANT PRIMER |
AIRBUS | A2PS 138-044 | APPLICATION OF FLUID RESISTANT (FR) ENAMELS AND DECORATIVE TOPCAOTS |
AIRBUS | A2PS138-055 | ACCELERATED CURING OF ORGANIC COATINGS |
Paint | ||
DRS | 8-6408. | Paint Specification |
DRS | 936686 | Pretreatment and Finish Requirements for JAB |
Paint | ||
Honeywell | 37-0132-000 | APPL PROT ORG FIN |
Honeywell | 3608053 | SPEC WRINKLE |
Honeywell | 3608059 | BLK LACQUER |
Honeywell | 3608061 | GRAY WRINKLE ENAMEL |
Honeywell | 3608062 | SEMI-GLOSS GRAY ENAMEL |
Honeywell | 3608068 | DARK GRAY SYN ENAMEL |
Honeywell | 91547-P6407 | FINISH SYSTEM FOR FERROUS METALS PROCESS FOR |
Honeywell | 91547-P6445 | Coating, Epoxy-Phenolic Resin, Thermosetting |
Honeywell | AI-357 | POLYURETHANE PAINTING OF WHEEL AND BRAKE COMPONENTS |
Honeywell | AMS2510 | Engine Gray Finishing Low Baking |
Honeywell | CDP 3.002 | Painting and Priming Procedure |
Honeywell | CDP 7.011 | Priming and Painting Procedure |
Honeywell | EMS92382 | TESTING AND INSPECTION REQUIREMENTS FOR ORGANIC FINISHES |
Honeywell | EPS-216 | ENGINEERING PROCESS SPECIFICATION FOR THE PAINTING-PIGMENTED PHENOLIC COATING |
Honeywell | EPS-562 | ENGINERING PROCESS SPECIFICATION FLUID RESISTANT EPOXY PAINT |
Honeywell | EPS-744 | APPLICATION OF CHEMICAL AGENT RESISTANT COATINGS |
Honeywell | EPS-751 | APPLICATION OF EPOXY POLYAMIDE PAINT |
Honeywell | FI-1715 | PAINT PROCESS SPECIFICATION |
Honeywell | FP133 | APPLICATION OF LOW DENSITY WATERBORNE EPOXY PRIMER (F-22) |
Honeywell | FP134 | APPLICATION OF VOC COMPLIANT EPOXY COATING (F-22) |
Honeywell | FP36 | EPOXY ESTER COATING |
Honeywell | FP5025 | PAINT, PROTECTIVE COATINGS AND FINISHES |
Honeywell | FP5073 | Finishes, Epoxy-Amine |
Honeywell | FP5074 | POLYURETHANE COATINGS, APPLICATION OF |
Honeywell | FP5104 | Coating, Sealing Resin, for Corrosion Protection, Application of |
Honeywell | FP5109 | Process for Protective Coating |
Honeywell | FP5110 | Paint, General Process for |
Honeywell | FP7036 | EPOXY ESTER COATING |
Honeywell | FP7073 | PROCESS SPECIFICATION FINISHES AND PLATING APPLICATION OF EPOXY-AMINE COATING SYSTEMS |
Honeywell | FP7074 | PROCESS SPECIFICATION FINISHES AND PLATING APPLICATION OF EPOXY-POLYAMIDE COATING SYSTEMS |
Honeywell | FP7076 | PROCESS SPECIFICATION FINISHES AND PLATING APPLICATION OF NITROCELLULOSE LACQUERS |
Honeywell | FP7077 | APPLICATION OF ALKYD ENAMELS |
Honeywell | FP7078 | PROCESS SPECIFICATION FINISHES AND PLATING APPLICATION OF POLYURETHANE COATINGS |
Honeywell | FP7080 | APPLICATION OF HIGH-TEMPERATURE COATINGS |
Honeywell | FP7081 | APPLICATION OF FLUOROCARBON COATINGS |
Honeywell | FP7083 | APPLICATION OF ACRYLIC COATING |
Honeywell | FP7089 | PROCESS SPECIFICATION FINISHES AND PLATING PAINTING PLASTICS |
Honeywell | FP81 | APPLICATION OF FLUOROCARBON COATINGS |
Honeywell | FP85 | APPLICATION OF ALUMINIZED SILICONE COATING |
Honeywell | FPC13391-09 | COATING, BLACK URETHANE, APPLICATION OF |
Honeywell | FPC13391-10 | WHITE, LOW OUTGASSING, POLYURETHANE ENAMEL, APPLICATION OF |
Honeywell | FPC13391-13 | COATING, WHITE POLYURETHANE APPLICATION OF |
Honeywell | FPC29002-01 | Process Specification for the Application of Coating, Paint, Epoxy and Urethane |
Honeywell | FPC29114-01 | APPLICATION OF LOW Z COATING TO METAL SURFACES |
Honeywell | GPS3300-1 | PAINT COATINGS, APPLICATION OF |
Honeywell | GPS7009-1 | PAINTING, POLYURETHANE (F/A-18) |
Honeywell | GPS7010-1 | COATING SYSTEM, EPOXY PRIMER, PROCESS FOR APPLICATION OF (F/A-18) |
Honeywell | GPS7310-1 | COATING, POLYURETHANE AND EPOXY PRIMER (GRIMES) |
Honeywell | HPS1010 | PAINT COATINGS, APPLICATION OF |
Honeywell | LHP5709 | Protective Coatings and Finishes, Paint |
Honeywell | LHP5710 | Corrosion Protective Paint, Application for Impact Resistance |
Honeywell | M2595289 | Manufacturing Specification for Application of Epoxy-Acrylic Finishes |
Honeywell | M4030956 | MANUFACTURING SPECIFICATION FOR APPLICATION OF HIGH-SOLIDS POLYURETHANE COATINGS |
Honeywell | M4065816 | MANUFACTURING SPECIFICATION FOR APPLICATION OF POLYURETHANE COATINGS |
Honeywell | M62001846 | MANUFACTURING SPECIFICATION FOR THE APPLICATION OF POLYURETHANE COATINGS |
Honeywell | M64009017 | MANUFACTURING SPECIFICATION FOR THE APPLICATION OF PAINT COATINGS |
Honeywell | NGPS 1031 | APPLICATION OF HIGH TEMPERATURE PAINTS TO OPERATE UP TO 650°C |
Honeywell | NGPS 1038 | APPLICATION OF EPOXY PRIMER CONFORMING TO MIL-P-23377 REV F OR G |
Honeywell | NGPS 1054 | GENERAL REQUIREMENTS FOR PAINTING AND APPLICATION OF DRY FILM LUBRICANTS |
Honeywell | NGPS 1072 | APPLICATION OF WATER-BORNE EPOXY PRIMER APPROVED TO LMA-MR003 CLASS 1 |
Honeywell | NGPS 1084 | APPLICATION OF LOW TEMPERATURE STOVING ENAMEL FOR HYMATIC USE |
Honeywell | NGPS 1085 | PAINT SCHEMES FROM ST116 (HYMATIC APPLICATIONS) |
Honeywell | NGPS 1094 | APPLICATION OF LEAD- AND CHROMATE-FREE PRIMER AND TOP-COAT |
Honeywell | NGPS 126 | HIGH TEMPERATURE RESISTANT PAINT |
Honeywell | NGPS 134 | HIGH TEMPERATURE ALUMINIUM PAINT |
Honeywell | NGPS 168 | APPLICATION OF ROCKHARD 576-450-002 (FORMERLY 444/176) TO MACHINED COMPONENTS WITH CLOSE TOLERANCES |
Honeywell | NGPS 69 | SURFACE SEALING OF COMPONENTS WITH EPOXY VARNISH |
Honeywell | NGPS 81 | APPLICATION OF COLD CURING CHROMATED EPOXY PRIMERS |
Honeywell | NGPS 836 | APPLICATION OF EROSION AND HEAT RESISTING PAINT |
Honeywell | NGPS 853 | EPOXY ENAMEL PAINT RESISTANT TO HYDRAULIC FLUIDS (TO MIL-PRF-22750F) |
Honeywell | NGPS 867 | POLYURETHANE PAINT SUITABLE FOR USE WITH SKYDROL LUBRICANTS |
Honeywell | NGPS 879 | APPLICATION OF ALUMINISED SILICONE COATING |
Honeywell | NGPS 90 | COLD CURING EPOXIDE TYPE FINISH RESISTANT TO ESTER LUBRICANTS |
Honeywell | NGPS 913 | APPLICATION OF POLYURETHANE STOVING ENAMEL |
Honeywell | NGPS 94 | APPLICATION OF ETCH PRIMER |
Honeywell | NGPS 976 | PAINT TO SPECIFICATION DEF STAN 80-152 (was DEF 1059-A) |
Honeywell | NGPS 984 | POLYURETHANE PAINT TO MIL-C-83286 |
Honeywell | P6430 | Application of Aluminum-Silicone Paint |
Honeywell | PC29055-01 | COATING, PAINT, URETHANE, TEXTURE, APPLICATION |
Honeywell | PC29091-01 | PRIMER COATING, APPLICATION OF |
Honeywell | PS-1301 | Zinc Dust Pigmented Primer Coating |
Honeywell | PS-1306 | Polyurethane Painting of Aircraft Wheel and Brake Components |
Honeywell | PS-1309 | Heat Resistant Paint Application |
Honeywell | PS-4016 | Preparation and Application of Epoxy Primers |
Honeywell | PS-4022 | PAINT APPLICATION |
Honeywell | PS-4027 | Insulation Coating |
Honeywell | PS-HBAS-1306 | Polyurethane Painting of Aircraft Wheel and Brake Components |
Honeywell | PS-HBAS-1309 | Heat Resistant Paint Application |
Honeywell | TT-C-490 | Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings) |
Conversion Coating | ||
Honeywell | 037-0032-000 | CHROMATE CONVERSION COATING ALUMINUM |
Honeywell | AMS03-18 | Chromate Conversion Coatings (Chromate Filming Treatments) Grades: Standard and Brushing for Aluminum and Aluminum Alloys |
Honeywell | CDP 7.201 | Chromate Conversion Coating of Aluminum |
Honeywell | LS 0201-002 | Aluminum Conversion Coat Tank Operation |
Honeywell | M690278 | PROCESS SPECIFICATION FOR CHEMICAL CONVERSION COATING OF ALUMINUM AND ALUMINUM ALLOYS |
Honeywell | M8258211 | Manufacturing Specification for Chemical Conversion Coatings |
Honeywell | NGPS 30 | CHROMATE CONVERSION COATINGS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
Honeywell | PS-1034 | Immersion or Spray Chemical Treatemnt for Aluminum and Aluminum Alloys (Alodine #1200 Process) |
Honeywell | PS-HBAS-1026 | Chemical Treatment for Aluminum and Aluminum Alloys |
Passivation | ||
Honeywell | 037-0137-000 | Passivation of Corrosion Resistant Steel |
Honeywell | 91547-P6402 | Passivation, Process for (AM350 and AM355 Materials) |
Honeywell | C5041 | Surface Cleaning and Passivation of Corrosion -and Heat-Resistant Alloys |
Honeywell | CDP 7.207 | Passivation Treatments for Steel Alloys |
Honeywell | ES-091 | Passivation Treatment for Corrosion Resistant Steel Immunization |
Honeywell | FPC29379-01 | Process Specification for Passivating Corrosion Resistant Steel Fasteners and Associated Hardware |
Honeywell | GPS3000-1 | CLEANING AND PASSIVATION, CORROSION-RESISTANT STEELS AND HEAT-RESISTANT ALLOYS |
Honeywell | LHP6010 | Corrosion and Heat Resistant Alloys, Surface Cleaning and Passivation of |
Honeywell | M69510 | MANUFACTURING SPECIFICATION FOR PASSIVATING STAINLESS STEEL - FINISH NO. 29 |
Honeywell | M8258251 | Manufacturing Specification for the Passivation of Stainless Steel |
Paint | ||
Lockheed Martin Aero | 2ZZP00001 | F-35 Finish Specification |
Lockheed Martin Aero | 16PR070 | F-16 Finish Codes |
Lockheed Martin Aero | 5PTPJT01 | F-22 Finish Specification |
Lockheed Martin Aero | 0471 | Finish Specification for C-130 series Airplanes |
Lockheed Martin Aero | STP59-007 | Polyurethane System MIL-PRF-23377/MIL-PRF-85285 Surface Preparation of, and application to C-5 |
Lockheed Martin Aero | G604R | Application of Organic Finishes to Aircraft Parts and Assemblies |
Lockheed Martin Aero | G700 | Application of Finishes to Aircraft Exterior Parts |
Lockheed Martin Aero | LMAPJ264 | Application and Control of Organic Finishes |
Lockheed Martin Aero | STP59-505 | Preparation of Application of Polyurethane Fuel Tank Coating AMS-C-27725 |
Lockheed Martin Aero | 5PTMRT03 | Low density Epoxy Primer |
Lockheed Martin Aero | 5PTMRT09-C | Non Chromated Low Density Epoxy Primer |
Lockheed Martin Aero | 5PTMRT09-QPL-3 | Non Chromated Low density Epoxy Primer |
Lockheed Martin Aero | 5PTPJL12 | Application of Primer Coatings |
Lockheed Martin Aero | 2026 | Zinc Chromate Primer (TT-P-1757)Preparation and Application of |
Lockheed Martin Aero | G14 | Aircraft Finishes Coding Schemes |
Lockheed Martin Aero | LMA-MR003 | Waterborne Epoxy Primer |
Lockheed Martin Aero | G79 | Application of PTFE |
Anodize | ||
Lockheed Martin Aero | STP58-206 | Hard Anodizing of Aluminum and Aluminum Alloys |
Lockheed Martin Aero | STP58-208 | Sulfuric Acid Anodizing of Aluminum and Aluminum Alloys |
Lockheed Martin Aero | STP58-209 | Chromic Acid Anodizing of Aluminum and Aluminum Alloys |
Lockheed Martin Aero | LAC 0445 | Hard Anodizing of Aluminum and Aluminum Alloys |
Lockheed Martin Aero | PS 0170 | Cleaning of Parts and Materials |
Lockheed Martin Aero | C-0170 | Cleaning of Parts and Materials |
Conversion Coating | ||
Lockheed Martin Aero | STP58-405 | Chemical Protective Film for Aluminum and Aluminum Alloys |
Lockheed Martin Aero | PS 0170 | Cleaning of Parts and Materials |
Lockheed Martin Aero | C-0170 | Cleaning of Parts and Materials |
Passivation | ||
Lockheed Martin Aero | FPS-3007 | Passivation of Corrosion Resistant Steel |
Lockheed Martin Aero | STP58-301 | Passivation of Stainless Steels |
Lockheed Martin Aero | PS 0170 | Cleaning of Parts and Materials |
Lockheed Martin Aero | C-0170 | Cleaning of Parts and Materials |
Paint | ||
Lockheed Martin MFC | 79P020011 | Process Specification for Powder Coating |
Lockheed Martin MFC | 79P050000 | Finish Specification, Standard General Process |
Lockheed Martin MFC | 764060000 | F2 Finish Specification |
Paint | ||
Lockheed Martin SPACE | STP30003 | Epoxy Coating, Corrosion Inhibiting, Application of |
Conversion Coating | ||
Lockheed Martin SPACE | MAP-311088 | Chemical Conversion Coatings of Aluminum and Alumin Alloys |
Paint | ||
MOOG | EP3773 | Application of Chemical and Solvent Resistant Finishes |
MOOG | EP3796 | Paint Coatings General |
MOOG | MRE20930 | Paint |
Anodize | ||
MOOG | MRE20939 | Anodize |
Conversion Coating | ||
MOOG | MRE20931 | Chemical Conversion Coating |
Anodize | ||
NAVSEA | 7519198 | Coating Anodic Conversion |
Paint | ||
Northrup Grumman | PS83680PC | Application of Polysiloxane Coatings |
Northrup Grumman | PS83680PA | Paint and Primer Application of |
Northrup Grumman | 32221BP | Paint, Semi-Gloss, Gray |
Northrup Grumman | P-P502 | Application of Conductive Coatings to Reinforced Plastic Parts |
Anodize | ||
PALL | PACS CP-0007 | Process Control Document for Anodizing Process |
Anodize | ||
PIPER | PPS 250000 | Anodic Coatings |
Paint | ||
Raytheon | 828034 | Paint Exterior Applications |
Raytheon | 4980199 | Coting Specification- Exterior and Interior Powder Coat |
Raytheon | A41841 | Paint and Processs Specification C-Band Radar Product Line |
Raytheon | D4224917 | TPX ADI CARC Paint Requirements |
Raytheon | RPR 17004 | Requirements for Polyurethane Coating Systems |
Raytheon | G371460 | Paint, epoxy, black, air dry or bake |
Raytheon | G371461 | Paint, Epoxy, Black, air dry or bake Textured Epoxy Paint System |
Raytheon | G611118 | Painting, Smart-T Specification for CARC |
Raytheon | G781772 | CARC Paint and Process Specification |
Raytheon | H346964 | Zumal Paint Process Specification |
Raytheon | H458775 | PAINT SPECIFICATION - NASAMS FINLAND |
Raytheon | H493669 | FINISH AND CARC PAINT REQUIREMENTS |
Raytheon | H503075 | Air and Missile Defense Radar (AMDR) Paint Material and Process Specification |
Raytheon | HP4-143 | PAINT, BLACK, ORGANIC, THERMAL CONTROL, APPLICATION OF |
Raytheon | MIS-20007 | Painting Process and Insopection Requirements for Missle and Ground Support Equipment |
Raytheon | MIS-35790 | Coating, Aliphatic Polyurethane CARC application of |
Raytheon | MIS-37252 | PAINTING PROCESS AND INSPECTION REQUIREMENTS FOR CHEMICAL AGENT RESISTANT COATING |
Raytheon | NPR 17004 | Polurethane coating for Al, Mg, Cu, Ni, Stainless |
Raytheon | WS10012 | ENAMEL PAINT SYSTEM, LOW VOLATILE ORGANIC CONTENT EPOXY, SEMI-GLOSS |
Raytheon | WS10013 | ENAMEL PAINT SYSTEM, LOW VOLATILE ORGANIC CONTENT EPOXY, SEMI-GLOSS |
Conversion Coating | ||
Raytheon | H314543 | Process for Producing a Bleached Chromate Conversion Coating on Aluminum |
Raytheon | MIS-58615 | PROCESS FOR PRODUCING A BLEACHED CHROMATE CONVERSION COATING ON ALUMINUM |
Passivation | ||
Raytheon | MIS-20134 | Passivation of Corrosion Resistant Steel |
Anodize | ||
ROCKWELL COLLINS | 580-0008 | Process, Finish, Anodic Coating |
Paint | ||
Woodward | 9995902329 | Spray Application of Powder Coat Material |
Anodize | ||
Woodward | SP-822 | SP Anodize |
Woodward | SP-222 | Hard Coating for Aluminum Alloys |
Woodward | 9995902004A | Anodizing of Aluminum parts |
Conversion Coating | ||
Woodward | SP-870 | Special Process Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
Passivation | ||
Woodward | 9995902003 | Chemical Passivation Treatments for Stainless Steel |
Woodward | ESS-001 | Passivation of Corrosion and Heat Resistant Alloys |
Woodward | SP-151 | Special Process Passivation |